National Luna Power Pack DC25, Руководство пользователя

Страница: 6 / 20

4
Wiring diagram - Typical Installation
Preparing for Installation
(Instructions on page 5)
The input cables must be terminated with a RED 50A coupler matching the one on the Power Pack DC25
marked "MAIN BATT".
If a solar panel input is used, it can be connected to the input marked "SOLAR PANEL".
2
Use 16mm cables for the input from the vehicle main battery and install the supplied 40A in-line fuse
close to the main battery on the positive cable (
Fig 1).
Once the battery type is selected, a battery can be installed into the Power Pack DC25 and the RED
input cable connected
(Fig 2) .
Before installing a battery into the Power Pack DC25, select the correct battery type.
Make sure all connections are secure and terminated correctly with appropriate tools.
For applications where the Power Pack DC25 is installed in a vehicle, locate the Power Pack such that
the input cables are not restricted or under strain. The Power Pack should also be secured to prevent
movement.
Connect the supply from the main
battery (alternator) to the RED input
on the Power Pack DC25. Install the fuse on the positive cable
close to the main battery.
Ensure terminals are crimped securely.
To vehicle
MAIN battery
Fuse
SOLAR Panels
SOLAR
MAIN
BA
TT
40A
+
-
Fig 1 Fig 2