National Luna NLDC-25, Руководство пользователя

Страница: 12 / 20

Remote display operation
Display mode 1 - This mode focuses on the auxiliary battery with the majority of the screen used to
show the auxiliary battery voltage and temperature (if probe is installed).
The input source (ALT or SOLAR) as well as charge current is displayed during a charge cycle.
If SOLAR is the active charge source, the solar panel voltage is displayed.
If there are no active charge cycles, “STBY” is displayed.
The remote monitor can be turned ON or OFF by pressing the POWER button.
The display will turn off automatically after a short delay if there is no active charge cycle.
The display brightness can be increased or decreased by pressing the
UP or DOWN buttons.
Display mode 2 - In this mode, the status of the main and auxiliary batteries are represented as
graphical bar-graphs. The actual voltages are shown for the respective batteries.
During a charge cycle, the input source (ALT or SOLAR) is displayed with the actual charge current.
If there is no active charge cycle, “STANDBY” is displayed.
The AUX graph is animated during charge and represents the battery state of charge.
Display mode 3 - This mode shows voltages of the respective main and auxiliary batteries as well as
charger mode, charge current, battery type and battery temperature (if probe is installed).
If there are no active charge cycles, “STBY” is displayed.
The remote monitor has 3 display modes that represent the status of the charging system in different ways.
Press the
MODE button to cycle through the different display options.
10