Index
Getting Started with Your VXIpc 800/700
I-2
©
National Instruments Corporation
hardware description, 1-1 to 1-2
hardware installation, 2-1 to 2-2
I
images directory, 1-4
initializing system before use
DOS, 2-3
Windows 3.x, 2-2
installation of VXIpc 800/700 Series, 2-1
to 2-2. See also setup.
interrupters, number of, 3-3
IRQ level, 3-3
L
LabVIEW software, 1-3, 2-2
LabWindows/CVI software, 1-3, 2-2
logical address, 3-3
logical address 0, 2-2
M
manual. See documentation.
manufacturer ID, 2-5
memory manager address requirements, 2-3
MITE configuration EEPROM, 3-1, 3-2
monitor requirements, 1-1
N
NI-488.2, 1-2
NI-VISA, 1-2
NI-VXI software
configurations, 1-3
DOS/Windows 3.1, 1-3
Upgrade for Windows 95, 1-3
Windows 95, 1-3
Windows NT, 1-3
description, 1-2
installation
DOS, 2-3
Windows 95/NT/3.1, 2-2
Non-VXI Device Configuration Editor, 2-4
O
OS directory, 1-4
P
parallel port DMA channel, 3-2
peripherals, 1-2
documentation for, 1-4
drivers.txt file, 1-5
Place below 1 MB checkbox, 2-3, 3-4
Power On Self-Configuration, 3-1, 3-2
Protocol register contents, 3-3
R
read protocol response, 3-3
request level, 3-4
RESMAN utility
DOS setup, 2-3
Windows setup, 2-2
Resource Manager delay, 3-3
Resource Manager Display, 2-4 to 2-5
S
SCSI termination, 3-2
servant area size, 3-3
shared RAM pool, 3-3
shared RAM size, 3-3
slot detection, 3-2
software
configurations, 1-3
default settings
Bus Configuration Editor (table), 3-4
Device Configuration Editor
(table), 3-3