Chapter 3
Default Settings
Getting Started with Your VXIpc 800/700
3-2
©
National Instruments Corporation
W1—SCSI Termination
Enabled
W2—CMOS Clear
CMOS not cleared
W4—Parallel Port DMA
Channel
Channel 1
W13—Slot Detection
Automatically detect slot
Table 3-2.
VXIpc 700 Series Hardware Default Settings
Hardware Component
Default Setting
W1—Slot detection
Automatically detect slot
W3—CMOS Clear
CMOS not cleared
W6—Ethernet EEPROM
Enabled. Do not alter this setting.
W7—MITE Configuration
EEPROM
Load values from user section
W10—Power On Self
Configuration (POSC)
Enabled. Do not alter this setting.
W12—TrigIn SMB Termination
Do not terminate
Table 3-1.
VXIpc 800 Series Hardware Default Settings (Continued)
Hardware Component
Default Setting
