3.
Select the
Devices
tab of the utility.
Your device should appear in the list on the left side of the tab.
4.
In the list, select the device for which you want to change the device ID.
If you have multiple devices, verify that you selected the correct device.
The device ID of the selected device displays in the
Selected Device ID
textbox.
5.
Enter the device ID for the device in the
New Device ID
textbox.
Note
The device ID cannot contain spaces or special characters.
The utility should appear similar to the following figure.
Figure 2.
Changing the Device ID
6.
Click the
Change Device ID
button or press <Enter> to change the device ID.
7.
The utility prompts you to confirm your selection. Click
OK
if your selection is correct;
otherwise, click
Cancel
.
8.
The utility displays a confirmation to indicate the process is complete. Click
OK
.
9.
Power cycle the device to apply the changes.
Note
After you change the device ID, you must power cycle the device and
click
Find Devices
in the utility to update the list of devices.
NI USRP-2900/2901 Getting Started Guide
|
© National Instruments
|
7
