Verifying the Kit Contents
6
7
3
1
TX OUTPUT MAX +20 dBm, RX INPUT MAX -1
5 dBm, ALL RF POR
TS 50
Ω
RF 0
TX1 RX1
RX2
TX1 RX1
RX2
RF 1
NI USRP-2901
70 MHz–6 GHz
NATIONAL
INSTRUMENTS
Designed by Ettus Research
2
5
4
1. NI 2900 or NI 2901 Device
2. AC/DC Power Supply and Power Cable (Included
Only in NI 2901 Kits)
3. USB 3.0 Cable
4. SMA (m)-to-SMA (m) Cable
5. 30 dB SMA Attenuator
6. Driver Software Media
7. NI USRP-2900/2901 Getting Started Guide (This
Document)
Caution
If you directly connect or cable a signal generator to your device, or if
you connect multiple USRP devices together, you must connect a 30 dB attenuator
to the RF input (RX1 or RX2) of each receiving USRP device.
Note
The driver software media installs the NI-USRP driver software and
electronic documentation, including the
NI-USRP Help
, the
NI-USRP Readme
, and
device specifications. After installation, you can access NI 2900/2901
documentation at
Start
»
All Programs
»
National Instruments
»
NI-USRP
»
Documentation
.
Other Required Items
In addition to the kit contents, you must provide the following additional items:
•
Computer with available USB 3.0 or USB 2.0 interface.
Caution
This product is not approved or licensed for transmission over the air
using an antenna. As a result, operating this product with an antenna may violate
local laws. Ensure that you are in compliance with all local laws before operating
this product with an antenna.
NI USRP-2900/2901 Getting Started Guide
|
© National Instruments
|
3
