Optional Items
•
Additional SMA (m)-to-SMA (m) cables to connect both channels with external devices
or to use the REF IN and PPS IN signals
•
6 V, 3 A external DC power connector
Preparing the Environment
Ensure that the environment you are using the USRP device in meets the following
specifications.
Operating temperature
0 °C to 55 °C
Operating humidity
10% to 90% relative humidity, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m
Indoor use only.
Note
Refer to the USRP device specifications at
ni.com/manuals
for complete
specifications.
Caution
When this symbol is marked on a product, the product could be
damaged if subjected to Electrostatic Discharge (ESD) on the connector pins of any
I/O port. To prevent damage, industry-standard ESD prevention measures must be
employed during installation, maintenance, and operation.
Caution
Do not operate the NI 290x in a manner not specified in this document.
Product misuse can result in a hazard. You can compromise the safety protection
built into the product if the product is damaged in any way. If the product is
damaged, return it to NI for repair.
Installing LabVIEW Communications System
Design Suite
You must be an Administrator to install NI software on your computer.
1.
Insert the USB software media into your computer. The installer should open
automatically.
If the installation window does not appear, navigate to the drive, double-click it, and
double-click
autorun.exe
.
4
|
ni.com
|
NI USRP-2900/2901 Getting Started Guide
