NI UMI-7774/72 User Guide and Specifications
6
ni.com
Some hardware may require the use of a metal, shielded enclosure (windowless version) to meet the
EMC requirements for special EMC environments such as, for marine use or in heavy industrial areas.
Refer to the hardware’s user documentation and the DoC
1
for product installation requirements.
When the hardware is connected to a test object or to test leads, the system may become more sensitive
to disturbances or may cause interference in the local electromagnetic environment.
Operation of this hardware in a residential area is likely to cause harmful interference. Users are required
to correct the interference at their own expense or cease operation of the hardware.
Changes or modifications not expressly approved by National Instruments could void the user’s right to
operate the hardware under the local regulatory rules.
Related Documentation
The following documents contain information that you might find helpful as you read this manual. All
referenced documents ship with the product and are available at
ni.com/manuals
.
•
Getting Started with NI-Motion for NI 73xx Motion Controllers
—Provides installation instructions
and general information about the NI-Motion product.
•
Getting Started with NI 7340/7350 Motion Controllers and AKD Servo Drives—
Explains how to
install and configure the AKD servo drives for use with the NI 7340 and NI 7350 motion
controllers.
•
Getting Started with NI 7330/7340/7350 Motion Controllers and P7000 Series Stepper
Drives
—Explains how to install and configure the P7000 series steper drives for use with NI 7330,
7340, and NI 7350 motion controllers.
•
NI-Motion LabVIEW Help
—Contains LabVIEW VI reference files and provides details about each
VI, including VI descriptions, lists of control and input terminals, usage, illustrations, and error codes.
•
NI-Motion Function Help
—Contains function reference files for C and Visual Basic and provides
details about each function, including a description of the function, a list of the function
parameters, illustrations, and error codes.
•
Measurement & Automation Explorer Help for Motion—
Provides information about using MAX
to configure the NI 73xx motion controller as well as some advanced conceptual information about
topics such as Bode analysis and control loop parameters.
•
NI 73xx motion controller user manuals—Describes the electrical and mechanical aspects of the
NI 73xx motion controller, and contains information about installing and operating the device.
•
Drive documentation
Installation
This section describes the required and optional items for getting started with the UMI-7774/72. This
section also explains how to unpack, configure, and install the UMI-7774/72.
Required Materials
The following items are necessary for installing and getting started with the UMI-7774/72:
❑
UMI-7774 or UMI-7772.
❑
24 ±10% VDC power supply (10 W minimum).
1
The Declaration of Conformity (DoC) contains important EMC compliance information and instructions for the user or
installer. To obtain the DoC for this product, visit
ni.com/certification
, search by model number or product line,
and click the appropriate link in the Certification column.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
