©
National Instruments Corporation
11
NI UMI-7774/72 User Guide and Specifications
Figure 6.
Fastening the DIN Rail Clip to the UMI-7774/72
2.
Insert one edge of the DIN rail into the deeper opening of the DIN rail clip, as shown in Figure 7.
3.
Press down firmly on the UMI-7774/72 to compress the spring until the clip locks in place on the
DIN rail.
Figure 7.
One Edge of DIN Rail Inserted in Clip
Caution
Disconnect power before removing the UMI-7774/72 from the DIN rail.
Mounting the UMI-7774/72 on a Panel
You must use a panel-mount kit to mount the UMI-7774/72 on a panel. You can order the appropriate
kit (part number 778709-01 or 778711-01) from National Instruments.
Complete the following steps to install the panel-mount kit.
Caution
Do
not
use screws longer than 0.25 in. to fasten the panel-mount accessory brackets to the
UMI-7774/72.
1
DIN Rail Clip
2
DIN Rail Clip Spring
3
DIN Rail
NA
TIONA
L
INS
TR
UME
NT
S
2
1
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com