National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the
Terms of Use
section on
ni.com/legal
for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location:
Help»Patents
in your software, the
patents.txt
file on your CD, or
ni.com/patents
.
© 2008 National Instruments Corporation. All rights reserved.
372513A-01
Feb08
What If the NI PXI-8183 Does Not Boot?
Several problems can cause a controller not to boot. Here are some things
to look for and possible solutions.
Things to Notice
:
•
Which LEDs come on? The
Power OK
LED should stay lit.
The
Drive
LED should blink during boot as the disk is accessed.
•
What appears on the display? Does it hang at some particular point
(BIOS, Operating System, and so on)? If nothing appears on the
screen, try a different monitor. Does your monitor work with a
different PC? If it hangs, note the last screen output that you saw for
reference when consulting National Instruments technical support.
•
What has changed about the system? Did you recently move the
system? Was there electrical storm activity? Did you recently add
a new module, memory chip, or piece of software?
Things to Try
:
•
Make sure the chassis is plugged in to a working power source.
•
Check any fuses or circuit breakers in the chassis or other power
supply (possibly a UPS).
•
Make sure the controller module is firmly seated in the chassis.
•
Remove all other modules from the chassis.
•
Remove any nonessential cables or devices.
•
Try the controller in a different chassis or a similar controller in this
same chassis.
•
Recover the hard drive on the controller. (Refer to the
Hard Drive
Recovery
section in the
NI PXI-8183 User Manual
.)
•
Clear the CMOS. (Refer to the
System CMOS
section in the
NI PXI-8183 User Manual
.)
For more troubleshooting information, refer to the
NI PXI-8183 User
Manual
. The manual is in PDF format on the documentation CD included
with your controller, and the National Instruments Web site,
ni.com
.
