National Instruments TB-9212, Процедура калибровки

Страница: 1 / 9

CALIBRATION PROCEDURE
TB-9212
This document contains the verification procedure for the TB-9212 with screw terminal and
TB-9212 with mini-TC. In this document, TB-9212 with screw terminal and TB-9212 with
mini-TC are inclusively referred to as TB-9212. For more information about calibration
solutions, visit
ni.com/calibration
.
Note
Refer to the NI 9212 Calibration Procedure on
ni.com/manuals
for
instructions on calibrating the NI 9212 module.
Contents
Software.................................................................................................................................... 2
Documentation.......................................................................................................................... 2
Test Equipment......................................................................................................................... 3
Building the Barrier Strip Assembly ................................................................................ 4
Test Conditions......................................................................................................................... 5
Initial Setup............................................................................................................................... 5
Verification............................................................................................................................... 6
Terminal Block CJC Verification..................................................................................... 6
Where to Go for Support .......................................................................................................... 9