EMC Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Notice
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Notice
To ensure the specified EMC performance, the length of all I/O cables must
be no longer than 3 m (10 ft).
Environmental Characteristics
Temperature and Humidity
Operating temperature
0 °C to 40 °C
3
Storage temperature range
-40 °C to 85 °C
Operating relative humidity range
10% to 90%, noncondensing
Storage relative humidity range
5% to 95%, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient)
Shock and Vibration
Operating shock
30 g peak, half-sine, 11 ms pulse
Operating vibration, random
5 Hz to 500 Hz, 0.3 g
rms
Non-operating vibration, random
5 Hz to 500 Hz, 2.4 g
rms
3
The chassis internal ambient temperature may reach 85 °C with all slots at the maximum allowed
power dissipation. In the SLSC-12001 chassis this corresponds to an external ambient of 40 °C.
4
|
ni.com
|
SLSC-12251 and SLSC-12252 User Manual