National Instruments SCXI-1581 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 72

National Instruments SCXI-1581 Скачать руководство пользователя страница 54

Appendix C

Common Questions

SCXI-1581 User Manual

C-2

ni.com

Can the SCXI-1581 current outputs be interactively controlled in
MAX or programmatically controlled using NI-DAQ function calls,
LabVIEW, or Measurement Studio?

No. The current-output level is 100

µ

A as long as the chassis is powered on.

You cannot power off or adjust the current output using MAX, NI-DAQ
function calls, or an ADE such as LabVIEW or Measurement Studio. If you
require this functionality, consider using an SCXI-1124 module or NI 670

X

device instead.

Can I create virtual channels for an SCXI-1581 current-output
channel?

No. As discussed above, you cannot programmatically control the current
outputs.

Can I connect

N

current-output channels in parallel to create a

precision current source that provides

N

×

100

µ

A?

This is not recommended. The accuracy or stability of the resulting
current-output value is unpredictable.

Can I connect

N

current-output channels in series to achieve a higher

terminal-voltage compliance limit?

No. Each current source is ground referenced. Therefore, you cannot place
multiple current-outputs in series.

Are the SCXI-1581 current output channels isolated with respect to
each other, the E Series DAQ device, or ground?

No. The SCXI-1581 does not contain any isolation circuitry. All current
outputs are referenced to chassis ground. If you require isolated current
outputs, consider the SCXI-1124 module instead.

Can I modify the SCXI-1581 circuitry to generate current at a level
different than 100

µ

A?

No. Do not attempt to modify any circuitry in the SCXI-1581.

Are there any user-serviceable parts inside the SCXI-1581?

No. There are no fuses, potentiometers, switches, socketed resistors, or
jumpers inside the module. Disassembly of the module for any reason can
void its warranty and nullify its accuracy specification.

«
...
52
53
54
55
56
...
»

Содержание SCXI-1581









































































Отзывы:

Нет отзывов