National Instruments SCXI-1581 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 72

National Instruments SCXI-1581 Скачать руководство пользователя страница 11

Chapter 1

Installing and Configuring the SCXI-1581

©

National Instruments Corporation

1-3

SCXI-1581 User Manual

Remove the module from the package and inspect the module for loose
components or any sign of damage. Notify NI if the module appears
damaged in any way. Do

not

install a damaged module into the SCXI

chassis.

Store the SCXI-1581 module in the antistatic package when not in use.

Installing the SCXI-1581 Module into the SCXI Chassis

You need the following items to complete the installation:

•

SCXI-1581

•

SCXI chassis or PXI combination chassis

•

1/4 in. flathead screwdriver

To install the SCXI-1581 module into the SCXI chassis, complete the
following steps while referring to Figure 1-1:

1.

Power off the computer that contains the E Series DAQ device, or
disconnect it from the SCXI chassis.

2.

Power off the SCXI chassis. Do

not

insert the SCXI-1581 module into

a chassis that is powered on.

3.

Insert the SCXI-1581 into an open slot in the SCXI chassis. Refer to
the

SCXI Quick Start Guide

for information on the correct order to

install modules. Gently guide the module into the slot guides and push
it toward the back of the chassis until the front face of the module is
flush with the front of the chassis.

4.

Insert any other SCXI modules into the remaining slots in the same
manner as described in step 3.

5.

Secure each SCXI module to the SCXI chassis using both
thumbscrews.

«
...
9
10
11
12
13
...
»

Содержание SCXI-1581









































































Отзывы:

Нет отзывов