National Instruments SCXI 1346, Руководство по установке

Страница: 10 / 19

SCXI-1346 Shielded Multichassis Cable Adapter 10 ni.com
Table 1 indicates the value each address switch represents when it is in
either the on or off position.
For example, if switch numbers 1 and 3 are set in the on position and the
others are not, the chassis address is 5.
1 + 0 + 4 + 0 + 0 = 5
After you have set a unique address for each chassis, plug in and turn on all
the chassis in the system, and replace the plastic cover on the address
switches.
Configuring the Multi-Chassis SCXI System
Once the system is connected and you have assigned addresses to each
chassis, you need to configure and verify each chassis using MAX.
Note Make sure all the SCXI chassis are turned on. MAX does not recognize unpowered
SCXI chassis.
1. Double-click the Measurement & Automation Explorer icon on
your desktop.
2. Expand Devices and Interfaces by left-clicking the + symbol.
You should see your DAQ device name and number in the list.
Table 1. Address Switch Number for Each Switch Position
Address
Switch Number On Position Off Position
5 16 0
4 8 0
3 4 0
2 2 0
1 1 0