National Instruments SCXI-1333, Руководство по установке

Страница: 5 / 13

© National Instruments Corporation 5 SCXI-1335 Terminal Block Installation Guide
Caution Never touch the exposed pins of connectors.
Remove the terminal block from the package and inspect the terminal block
for loose components or any sign of damage. Notify National Instruments
if the terminal block appears damaged in any way. Do
not install a damaged
terminal block into your system.
Store your SCXI-1335 terminal block in the antistatic envelope when not
in use.
Connecting Signals
Note Refer to the Safety Information section before removing equipment covers or
connecting or disconnecting any signal wires.
To connect the signal(s) to the terminal block, perform the following steps,
referring to Figures 1 and 2 as necessary:
Figure 1. SCXI-1335 Parts Locator Diagram
1 Expansion Connector
2 Thumbscrews
3 Strain-Relief Screws
4 Strain-Relief Bar
5 Safety Ground Lug
6 Top Cover
7 Top Cover Screw
2
1
3
1
6
4
5
7