background image

SCC-TC Series Thermocouple Input Modules User Guide

14

ni.com

Environmental

Operating temperature ............................0 to 50 °C

Storage temperature ................................–20 to 70 °C

Humidity .................................................10 to 90% RH, noncondensing

Maximum altitude...................................2,000 m

Pollution Degree (indoor use only) ........2

Safety

The SCC-TC0

X

 meets the requirements of the following standards 

for safety and electrical equipment for measurement, control, and 
laboratory use:

IEC 61010-1, EN 61010-1

UL 3111-1, UL 61010B-1

CAN/CSA C22.2 No. 1010.1

Note

For UL and other safety certifications, refer to the product label, or visit 

ni.com/hardref.nsf

, search by model number or product line, and click the 

appropriate link in the Certification column.

Electromagnetic Compatibility

Emissions................................................EN 55011 Class A at 10 m

FCC Part 15A above 1 GHz

Immunity ................................................EN 61326:1997 + A2:2001, 

Table 1

CE, C-Tick, and FCC Part 15 (Class A) Compliant

Note

For full EMC compliance, operate this device with shielded cabling. In addition, 

all covers and filler panels must be installed.

CE Compliance

The SCC-TC0

X

 meets the essential requirements of applicable European 

Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety)..............73/23/EEC

Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC

Содержание SCC-TC Series

















Отзывы: