National Instruments SCC-TC Series, Руководство пользователя

Страница: 3 / 16

© National Instruments Corporation 3 SCC-TC Series Thermocouple Input Modules User Guide
What You Need to Get Started
To set up and use the SCC-TC0 X , you need the following items:
❑
SC-2345/2350 with one of the following:
– SCC-PWR01
– SCC-PWR02 and the PS01 power supply
– SCC-PWR03 (requires a 7 to 42 VDC power supply, not included)
❑
One or more SCC-TC0 X modules
❑
SCC-TC Series Thermocouple Input Modules User Guide
❑
Read Me First: Safety and Radio-Frequency Interference
❑
SC-2345/2350 User Manual , available at
ni.com
❑
SCC Quick Start Guide , available at
ni.com
❑
SC-2345 Quick Reference Label
❑
68-pin E Series DAQ device, documentation, and 68-pin cable
❑
1/8 in. flathead screwdriver
❑
Numbers 1 and 2 Phillips screwdrivers
❑
Wire insulation strippers
❑
NI-DAQ (current version) for Windows 2000/NT/XP/Me
Note Software scaling of measurements is not supported on the Macintosh operating
system. Refer to the Scaling Voltage Measurements section for more information about
measurement scaling.