NI SCC-CTR01 User Guide and Specifications
2
ni.com
italic
Italic text denotes variables, emphasis, a cross-reference, or an introduction
to a key concept. Italic text also denotes text that is a placeholder for a word
or value that you must supply.
monospace
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.
NI SC-2345
NI SC-2345 refers to both the NI SC-2345 connector block and the
NI SC-2345 with configurable connectors.
SCC
SCC refers to any SCC Series signal-conditioning module.
What You Need to Get Started
To set up and use the NI SCC-CTR01, you need the following items:
❑
NI SC-2345 with one of the following:
–
SCC-PWR01
–
SCC-PWR02 and the PS01 power supply
–
SCC-PWR03 (requires a 7 to 42 VDC power supply, not included)
❑
One or more NI SCC-CTR01 modules
❑
NI SC-2345/2350 Carrier User Manual
, available at
ni.com
❑
NI SCC-CTR01 Isolated Counter/Timer I/O Module User Guide and
Specifications
❑
SCC Quick Start Guide
, available at
ni.com
❑
Read Me First: Safety and Radio-Frequency Interference
❑
SC-2345 Quick Reference Label
❑
68-pin E/M Series DAQ device with the following:
–
Documentation
–
68-pin cable of less than 2 m length
❑
1/8 in. flathead screwdriver
❑
Numbers 1 and 2 Phillips screwdrivers
