2-22
|
ni.com
Chapter 2
Installation and BIOS Setup
COM2 VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The
options are
Disabled
and
Enabled.
COM2 Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages to a
remote server. The options are
Disabled
and
Enabled
.
COM2 Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are
Disabled
and
Enabled
.
COM2 Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console Redirection for
legacy OS support. The options are
80x24
and
80x25
.
COM2 Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal emulator
designed for the Windows OS. The options are
VT100
,
LINUX
,
XTERMR6
,
SCO
,
ESCN
, and
VT400
.
COM2 Redirection After BIOS Post
Use this feature to enable or disable legacy Console Redirection after BIOS POST. When set
to Bootloader, legacy Console Redirection is disabled before booting the OS. When set to
Always Enable, legacy Console Redirection remains enabled when booting the OS. The
options are
Always Enable
and
Bootloader
.
EMS (Emergency Management Services) Console Redirection
Select Enabled to use a COM port selected by the user for EMS Console Redirection. The
options are
Enabled
and
Disabled.
*If the item above set to Enabled, the following items will become available for user's
configuration:
EMS Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data with the
client computer, which is the remote computer used by the user.
Out-of-Band Management Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are
COM1
and
SOL/COM2
.