manualshive.com logo in svg

National Instruments RMC-8354, Руководство пользователя

Поделиться
Скачать
National Instruments RMC-8354 Скачать руководство пользователя страница 34

© National Instruments

|

2-19

NI RMC-8354 User Manual

Recoverable POST Error Beep Codes

When a recoverable error occurs during POST, the BIOS displays a POST code that describes 
the problem. The BIOS also may issue one of the following beep codes: 
•

One long and eight short beeps

: Video configuration error.

•

One repetitive long beep

: No memory detected.

•

One continuous beep with the front panel Overheat LED on

: System overheat.

Rack Mounting

Note

The rack mount kit provided with the NI RMC-8354 is intended to work with 

racks that are 26 to 33 in. deep. For information about installing the NI RMC-8354 
into a rack that is less than 26 in. deep, refer to KnowledgeBase 4GCEKKMT at 

ni.com/support

.

The rack mounting hardware includes:
•

One pair of inner slides to be installed on the chassis.

•

One pair of outer slides to be installed in the rack.

•

Three pairs of short brackets for the outer slides.

•

Bag of assorted fasteners.

•

One pair of long brackets for the rear of the outer slides.

Caution

When mounting the equipment in the rack, do not create a hazardous 

condition due to uneven mechanical loading.

Note

One pair of short brackets includes screw threads, and the other two pairs 

have slots. If the short brackets are required for your specific rack mounting 
configuration, use the pair(s) that fits into your rack best.

Note

Rack mounting hardware provided in the accessory kit, but not specifically 

described in the following instructions, is for other possible rack mounting 
configurations not mentioned in this manual. Consult any relevant literature provided 
with the intended rack for specific mounting information before attempting to install 
the NI RMC-8354.

Содержание RMC-8354







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды