Getting Started Guide
Note
Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, test, and use the
PXIe-7911/7912/7915. You can program the PXIe-7911/7912/7915 with the following
software options.
■
FlexRIO Support driver software
■
NI LabVIEW Instrument Design Libraries for FlexRIO (instrument design
libraries)
Safety Guidelines
Caution
You can impair the protection provided by the
PXIe-7911/7912/7915 if you use it in a manner not described in this
document.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and
prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
© National Instruments
3
PXIe-7911/7912/7915 Getting Started
