Accessing FlexRIO Examples
FlexRIO examples are available in LabVIEW's NI Example Finder. Complete the
following steps to access the examples by task.
1. In LabVIEW, click
Help
»
Find Examples
.
2. In the
NI Example Finder
window that appears, click
Hardware Input and
Output
»
FlexRIO
.
Click on an example and refer to the
Information
window for a description of
the example. Refer the
Requirements
window for a list of hardware that can
run the example.
You can also click the Search tab to search all installed examples by keyword.
For example, search for FlexRIO to locate all FlexRIO examples.
Online examples are also available to demonstrate FlexRIO basics, such as using
DRAM, acquiring data from adapter modules, and performing high throughput
streaming. To access these examples, search FlexRIO examples in the
Search the
community
field at
Block Diagram
The following figure shows the PXIe-7911 block diagram and signal flow.
Figure 5. PXIe-7911 Block Diagram
Power Supplies
Flash
FPGA
Clocking
PXI/PXIe
Connectors
Triggers
Triggers
Clk 100, Clk 10
DStarB, DStarC
PXIe Lanes
12 V, 3.3 V
The following figure shows the block diagram and signal flow for both the PXIe-7912
and PXIe-7915.
© National Instruments
13
PXIe-7911/7912/7915 Getting Started
