![background image](http://html1.mh-extra.com/html/national-instruments/pxie-5665/pxie-5665_getting-started-manual_3614210006.webp)
Other Equipment
There are several required items not included in your device kit that you need to install or
operate the PXIe-5665.
Required Items
•
A PXI Express chassis and chassis documentation. The PXIe-1075 chassis is one
available option for your device. For more information about compatible chassis options,
refer to
.
•
A PXI Express embedded controller or MXI controller system that meets the system
requirements specified in this guide and chassis documentation.
Optional Items
•
A 1 N · m standard SMA torque wrench (NI part number 780487-01).
•
(If you are using NI-RFSA 2.4) An SMA (m)-to-BNC (m) cable (part number
151890A-1R25). Use this cable to connect the REF OUT (10 MHz) connector on the
PXIe-5653 front panel to the REF IN connector on the back of the PXI Express chassis.
NI-RFSA versions 2.5 and later do not require this connection.
Preparing the Environment
Ensure that the environment you are using the PXIe-5665 in meets the following
specifications.
Operating ambient temperature
(IEC 60068-2-1, IEC 60068-2-2)
0 °C to 55 °C
Operating relative humidity
(IEC 60068-2-56)
10% to 90%, noncondensing
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient
temperature)
Pollution Degree
2
Indoor use only.
Caution
Clean the hardware with a soft, nonmetallic brush or lint free cloth. Make
sure that the hardware is completely dry and free from contaminants before returning
it to service.
Note
Refer to the
PXIe-5665 Specifications
for complete
specifications.
PXIe-5665 Getting Started Guide
|
© National Instruments
|
5
Содержание PXIe-5665
Страница 1: ...PXIe 5665...