![background image](http://html1.mh-extra.com/html/national-instruments/pxie-5603/pxie-5603_getting-started-manual_3615351005.webp)
Interconnecting the Master NI 5665 Modules
Figure 3.
NI 5665 3.6 GHz VSA Cable Configuration
OUT
NI PXIe-5653
Synthesizer
REF IN
10 MHz
5 V p-p MAX
REF OUT
10 MHz
1.5 V p-p MAX
REF OUT
100 MHz
1.5 V p-p MAX
LO3
800 MHz
LO2
4 GHz
LO1
3.2 GHz - 8.3 GHz
ESD
SENSITIVE
OUT
ALL PORTS
50
Ω
ACCESS
ACTIVE
CLK IN
CLK OUT
PFI 1
ESD
SENSITIVE
TT L
6.3 Vp-p
MAX
2 Vp-p
NOM
+20 dBm MAX
50
Ω
50
Ω
50
Ω
NI PXIe-5622
16-Bit IF Digitizer
IF IN
ESD
SENSITIVE
ACCESS
ACTIVE
OUT
IN
LO3
LO2
LO1
ALL PORTS
50
Ω
NI PXIe-5603
Downconverter 20 Hz - 3.6 GHz
RF IN
0 V DC, DC COUPLED
25 V DC MAX, AC COUPLED
+20 dBm MAX > 10 MHz
0 dBm MAX < 10 MHz
+15 dBm MAX
25 V DC MAX
+15 dBm MAX
0 V DC
IF OUT
+22 dBm MAX
0 V DC
K
K
J
J
J
J
J
J
3
2
1
1. Medium, Semi-Rigid SMA-to-SMA Cables, Labeled J
2. Flexible SMA-to-SMA Cable
3. Short, Semi-Rigid SMA-to-SMA Cable, Labeled K
1. Using the three medium semi-rigid SMA-to-SMA cables (labeled J), connect the LO1,
LO2, and LO3 connectors on the NI 5653 front panel to the associated LO1 IN, LO2 IN,
and LO3 IN connectors on the NI 5603 front panel.
2. Using the flexible SMA-to-SMA cable, connect the REF OUT 100 MHz connector on the
NI 5653 front panel to the CLK IN connector on the NI 5622 front panel.
3. Using the short semi-rigid SMA-to-SMA cable (labeled K), connect the IF OUT
connector on the NI 5603 front panel to the IF IN connector on the NI 5622 front panel.
4. Hand-tighten all SMA cable ends on the SMA connectors after the cable center pins are
correctly aligned and connected. The cable connectors should tighten without much
torque or effort. If a cable bends due to incorrect alignment, remove the cable from the
front panel connector and reconnect the cable center pin on the SMA cable to the SMA
connector.
5. Carefully complete tightening all SMA connectors to 1 N · m using an appropriate torque
wrench (not included) or torque screwdriver and SMA driver bit. Tighten only until the
wrench clicks.
4
|
ni.com
|
NI PXIe-5665 3.6 GHz Vector Signal Analyzer MIMO Platform Getting Started Guide
Содержание PXIe-5603
Страница 1: ...PXIe 5653...