National Instruments PXIe-4339, Руководство по установке

Страница: 1 / 20

INSTALLATION GUIDE AND TERMINAL BLOCK
SPECIFICATIONS
NI PXIe-4339 and TB-4339/B/C
8 Ch, 24-bit, 25.6 kS/s Universal Bridge Input Module
This document explains how to install, configure, and set up the NI PXIe-4339 SC Express
universal bridge module and TB-4339/4339B/4339C (TB-4339/B/C) terminal block. Driver
support for the NI PXIe-4339 was first available in NI-DAQmx 14.2. For the list of devices
supported by a specific release, refer to the NI-DAQmx Readme, available on the
version-specific download page or installation media.
Note
The keying of these terminal blocks prevents them from connecting to other
modules that could be damaged by the voltage present on the terminal block.
However, you should only use these terminal blocks with their supported modules.
Contents
Electromagnetic Compatibility Guidelines .............................................................................. 2
What You Need to Get Started ................................................................................................. 2
Installation ................................................................................................................................ 3
Install the Software........................................................................................................... 3
Unpack and Install the Module......................................................................................... 3
Connect the Signals .......................................................................................................... 5
Install the Terminal Block ................................................................................................ 8
Confirm SC Express Module Recognition ....................................................................... 9
Run Test Panels ................................................................................................................ 10
Take an NI-DAQmx Measurement .................................................................................. 11
NI-DAQmx Channels and Tasks.............................................................................. 11
Configure a Task Using the DAQ Assistant in MAX .............................................. 11
Use Your SC Express Module in an Application ............................................................. 12
Programming Examples ........................................................................................... 12
Terminal Block Removal.......................................................................................................... 12
Module Removal ...................................................................................................................... 13
Create a Simulated Device ....................................................................................................... 14
More Information ..................................................................................................................... 15
Troubleshooting................................................................................................................ 15
Specifications (TB-4339/B/C).................................................................................................. 15
Calibration Interval................................................................................................................... 15