PXIe-4310 and TB-4310 (10V)/TB-4310 (600V)
|
© National Instruments
|
5
Caution
To protect yourself, the chassis, and the PXIe-4310 from electrical
hazards, leave the chassis powered off until you finish installing the PXIe-4310
module.
3.
Touch a metal part on the chassis to discharge any accumulated static electricity.
4.
Identify a supported PXIe slot in the chassis. PXIe-4310 modules can be placed only in the
supported slot types identified in Table 1. Figure 1 shows the slot type symbols of the
various slot types. Refer to your chassis documentation for more details.
Figure 1.
PXIe/PXI Chassis Slot Type Symbol Location
5.
Remove the filler panel, and touch any metal part of the chassis to discharge static
electricity.
6.
Place the module edges into the module guides at the top and bottom of the slot.
Caution
When installing the module, make sure both edges are positioned inside
the guides and that the module components do not come into contact with adjacent
modules.
7.
Slide the module along the guides until it reaches the rear connector then seat the module
by pushing the front panel until it is flush with the front panel of the chassis.
1
Slot Type Symbols Locations
Table 1.
PXIe-4310 Supported Slot Types
PXI Chassis Slot Type Symbol
Supported Slot Type Description
PXIe Peripheral
PXI/PXIe Hybrid Peripheral
PXIe System Timing or PXIe Peripheral
NI PXIe-1062Q
1
