Environmental Guidelines.................................................................................................6
Compliance and Standards................................................................................................7
Additional Resources................................................................................................................ 8
NI Services................................................................................................................................9
Icons
Notice
Take precautions to avoid data loss, loss of signal integrity, degradation of
performance, or damage to the model.
Caution
Take precautions to avoid injury. Consult the model documentation for
cautionary statements when you see this icon printed on the model. Cautionary
statements are localized into French for compliance with Canadian requirements.
Getting Started with the PXIe-4162/4163 Noise
Filter Accessory
Kit Contents and Other Equipment
Your kit includes an assembled PXIe-416
x
Noise Filter Accessory. In addition, you will need
the following items not included in your PXIe-416
x
Noise Filter Accessory kit to install and
use the PXIe-416
x
Noise Filter Accessory.
•
PXIe-4162/PXIe-4163
1
•
Number 1 Phillips-head screwdriver
Visit
for more information about the PXIe-4162/PXIe-4163.
Installing the PXIe-416x Noise Filter Accessory
Complete the following steps to install the PXIe-416
x
Noise Filter Accessory with a
PXIe-416
x
.
Before you begin, install the PXIe-416
x
in a chassis and ensure that all signals are
disconnected from the PXIe-416
x
if you have not already done so. Refer to the getting started
for installation instructions.
1.
Connect the PXIe-416
x
Noise Filter Accessory to the PXIe-416
x
.
a)
Align the male D-SUB connector on the PXIe-416
x
Noise Filter Accessory and the
female D-SUB connector on the front of the PXIe-416
x
and attach.
b)
Tighten the screws on the front of the PXIe-416
x
Noise Filter Accessory until the
accessory is secured to the PXIe-416
x
. Tighten to a maximum torque of 3.6 lb · in.
(0.407 N · m).
1
If you use the PXIe-416
x
Noise Filter Accessory with a PXIe-4162/PXIe-4163, refer to your
for pinout and signal information during installation.
2
|
ni.com
|
PXIe-416x Noise Filter Accessory User Guide
