background image

Glossary

NI PXI-8101/8102 User Manual

G-4

ni.com

I

I/O

Input/output—The techniques, media, and devices used to achieve 
communication between machines and users.

IDE

Integrated Drive Electronics—Hard disk and built-in controller.

IEEE

Institute of Electrical and Electronics Engineers.

in.

Inches.

instrument driver

A set of routines designed to control a specific instrument or family of 
instruments, and any necessary related files for LabWindows/CVI or 
LabVIEW.

interrupt

A means for a device to request service from another device.

interrupt level

The relative priority at which a device can interrupt.

IRQ#

Interrupt request signal.

ISA

Industry Standard Architecture—The original PC bus architecture, 
specifically the 16-bit AT bus.

K

kB

Kilobytes of memory.

L

LAN

Local Area Network—Communications network that serves users within 
a confined geographical area. It is made up of servers, workstations, 
a network operating system, and a communications link.

LED

Light-emitting diode.

M

m

Meters.

master

A functional part of a PXI device that initiates data transfers on the 
PXI backplane. A transfer can be either a read or a write.

Содержание PXI-8101
















































































Отзывы: