3
Plug in the AC power cord.
(Power cords are available from National Instruments, or use a power cord that
meets the requirements of ANSI/UL817 for use in the United States, CSA C22.2 21
and 49 for use in Canada, and IEC 227 or 245 for use in the European Union.
AC mains power supply cords used with the PXI-1002 in other countries must be
approved by the authority having jurisdiction in that country.)
4
Install your controller in Slot 1 of your PXI-1002.
Install peripheral cards, if any, in slots 2 through 4.
5
Power on the chassis.
Power Cord
Ejector Handle in Down Position
Peripheral Card
PXI Controller
PXI-1002 Chassis
