NI PS-15/16/17 Side Mount Brackets Installation Guide
6
ni.com
DIN-Rail Mounting
Complete the following steps to mount the brackets to a DIN-Rail.
1.
Install the mounting plate with the steps described in the
section. When those steps are completed, the
mounting plate should be attached to the power supply as shown
in Figure 7.
Figure 7.
Installing the Mounting Brackets
2.
Attach the two aluminum brackets and the plastic slider to the side
mounting plate, as shown in Figure 8. The additional required screws
are included in the shipping box.
Figure 8.
Installing the Aluminum Brackets and Plastic Slider
