manualshive.com logo in svg
background image

Getting Started with the NI PCIe-1433

6

ni.com

Safety

This product meets the requirements of the following standards of safety for electrical equipment for 
measurement, control, and laboratory use:

IEC 61010-1, EN 61010-1

UL 61010-1, CSA 61010-1

Note

For UL and other safety certifications, refer to the product label or the 

Online Product

 

Certification

 section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for electrical equipment for 
measurement, control, and laboratory use:

EN 61326 (IEC 61326): Class A emissions; Basic immunity

EN 55011 (CISPR 11): Group 1, Class A emissions

AS/NZS CISPR 11: Group 1, Class A emissions

FCC 47 CFR Part 15B: Class A emissions

ICES-001: Class A emissions

Note

For the standards applied to assess the EMC of this product, refer to the 

Online Product

 

Certification

 section.

Note

For EMC compliance, operate this device with shielded cables and according to the 

documentation.

CE Compliance

This product meets the essential requirements of applicable European Directives as follows:

2006/95/EC; Low-Voltage Directive (safety)

2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Online Product Certification

Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance 
information. To obtain product certifications and the DoC for this product, visit 

ni.com/

certification

, search by model number or product line, and click the appropriate link in 

the Certification column.

Environmental Management

National Instruments is committed to designing and manufacturing products in an environmentally 
responsible manner. NI recognizes that eliminating certain hazardous substances from our products is 
beneficial not only to the environment but also to NI customers.

For additional environmental information, refer to the 

NI and the Environment

 Web page at 

ni.com/

environment

. This page contains the environmental regulations and directives with which NI complies, 

as well as other environmental information not included in this document.

Содержание PCIe-1433









Отзывы: