National Instruments PCI-8430, Руководство пользователя

Страница: 88 / 237

4. Enter the IP address or the hostname of the serial ENET interface
in the IP address or hostname edit box. An example of an IP
address is
137.65.220.40
. An example of a hostname is
nienetB9B76A
.
5. Enter the full path of the binary file where the firmware is located
in the EEPROM binary image filename edit box. You also can
click Browse... to locate the file.
6. Click Update to update the firmware. The NI Ethernet Device
Firmware Update utility communicates with the specified serial
ENET interface to verify the box has no open network connections
and determine the current version of the firmware in the unit. A
dialog box reports that the update utility is searching for the
Ethernet device.
7. The utility prompts you to confirm the change you are about to
perform. Click OK to continue. As the update utility transfers the
firmware image to your serial ENET interface, the Update
Progress status bar fills, and the Current status box describes
each step in the process. The Current status box reports
whether the firmware update completed successfully or failed.
The serial ENET interface automatically reboots with the new
firmware in effect.
Caution Do not power-off the serial ENET interface or
disconnect the power supply while running the NI Ethernet
Device Firmware Update utility. Doing so will damage the
unit.
8. Click Exit to close the NI Ethernet Device Firmware Update utility.