National Instruments PCI-6509 Скачать руководство пользователя

Страница: 25 / 27

PCI/PXI/PCIe-6509 User Guide and Specifications

Safety

This product meets the requirements of the following standards of safety for electrical equipment
for measurement, control, and laboratory use:
•

IEC 61010-1, EN 61010-1

•

UL 61010-1, CSA 61010-1

Note

For UL and other safety certifications, refer to the product label or the

Online

Product Certification

section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•

EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity

•

EN 55011 (CISPR 11): Group 1, Class A emissions

•

AS/NZS CISPR 11: Group 1, Class A emissions

•

FCC 47 CFR Part 15B: Class A emissions

•

ICES-003: Class A emissions

Note

For the standards applied to assess the EMC of this product, refer to the

Online Product Certification

section.

Note

For EMC compliance, operate this device only with the SH100-100-F

shielded cable.

Environmental Standards

The NI 6509 meets the requirements of the following environmental standards for electrical
equipment.
•

IEC-60069-2-1 - Cold

•

IEC-60068-2-2 - Dry Heat

•

IEC-60068-2-78 - Damp Heat (steady-state)

•

IEC-60068-2-64 - Random Operating vibration (PXI-6509 Only)

•

IEC-60068-2-27 - Operating shock (PXI-6509 Only)

•

MIL-PRF-28800F - Operating shock (PXI-6509 Only)
•

Random vibration for nonoperating Class 3.

CE Compliance

This product meets the essential requirements of applicable European Directives as follows:
•

2014/30/EU; Electromagnetic Compatibility Directive (EMC)

•

2011/65/EU; Restriction of Hazardous Substances (RoHS)

Содержание PCI-6509




























Результаты поиска

Содержание PCI-6509

Отзывы:

Похожие инструкции для PCI-6509

Бренды по названию

Популярные бренды

National Instruments PCI-6509, Руководство пользователя

Результаты поиска

Содержание PCI-6509

Отзывы:

Похожие инструкции для PCI-6509

Бренды по названию

Популярные бренды