PCI/PXI/PCIe-6509 User Guide and Specifications
|
© National Instruments
|
23
Output Signals
The total current sinking/sourcing from one port cannot exceed 100 mA.
Without the disk drive power connector installed, the +5 V supply and the DIO lines share the
same power source. In this case, use the following equation to determine the current available at
the +5 V terminal. In the equation, I
DIO
is the total current sourced on all DIO lines.
I
+5V
= 1.2 A
I
DIO
With the disk drive power connector installed, the current at the +5 V terminal is supplied by an
external power source. In this case, the current at the +5 V terminal can be up to 1 A.
Negative-going threshold (VT
)
0.8 V
—
Delta VT hysteresis (VT+
VT
)
0.2 V
—
Input high current (I
IH
)
(V
in
= 5 V, resistors set to pull-up)
—
260
A
Input high current (I
IH
)
(V
in
= 5 V, resistors set to pull-down)
—
260
A
Input low current (I
IL
)
(V
in
= 0 V, resistors set to pull-up)
—
–1250
A
Input low current (I
IL
)
(V
in
= 0 V, resistors set to pull-down)
—
20
A
Level
Minimum
Maximum
High-level output current (I
OH
)
—
–24 mA
Low-level output current (I
OL
)
—
24 mA
Output voltage (V
out
)
0 V
5.5 V
Output high voltage (V
OH
), at –24 mA
3.4 V
—
Output low voltage (V
OL
), at 24 mA
—
0.78 V
Level
Minimum
Maximum