background image

©

 National Instruments Corporation

7

Getting Started with the NI PXI/PCI-1428

Power Consumption

NI PXI-1428 ..................................................+5 V (250 mA)

+3.3 V (1.2 A)

NI PCI-1428...................................................+5 V (1.5 A)

+12 V (24 mA)
–12 V (20 mA)

Environment

The NI 1428 device is intended for indoor use only.

Operating temperature ...........................................0 °C to 55 °C

Storage temperature ...............................................–20 °C to 70 °C

Pollution Degree ....................................................2

Relative humidity...................................................5% to 90%, noncondensing

Approved at altitudes up to 2,000 m.

Safety

This product is designed to meet the requirements of the following standards of safety for electrical 
equipment for measurement, control, and laboratory use:

IEC 61010-1, EN 61010-1 

UL 61010-1, CSA 61010-1

Note

For UL and other safety certifications, refer to the product label or visit 

ni.com/

certification

, search by model number or product line, and click the appropriate link in the 

Certification column.

Electromagnetic Compatibility

This product is designed to meet the requirements of the following standards of EMC for electrical 
equipment for measurement, control, and laboratory use:

EN 61326 EMC requirements; Minimum Immunity

EN 55011 Emissions; Group 1, Class A

CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A

Note

For EMC compliance, operate this device to product documentation.

CE Compliance

This product meets the essential requirements of applicable European Directives, as amended for 
CE marking, as follows:

73/23/EEC; Low-Voltage Directive (safety)

89/336/EEC; Electromagnetic Compatibility Directive (EMC)

Note

Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory 

compliance information. To obtain the DoC for this product, visit 

ni.com/certification

search by model number or product line, and click the appropriate link in the Certification column.

Содержание NI PXI/PCI-1428









Отзывы: