Chapter 3
Windows and Menus
©
National Instruments Corporation
3-21
Stop packet on reception
Stops continuous capture when a
error (HW)
reception error occurs.
Write to file
Writes captured data directly to the file
specified in the field. If you select
Continuous capture when max
reached
, the NI-FBUS Monitor writes
data to the file until you stop the capture.
During a continuous capture, the number
of packets retained in memory does not
exceed the value in the
Max num of
packets
field.
Display Settings Tab
The
Display Settings
tab allows you to select the colors of packet portions
and the font the NI-FBUS Monitor uses to display data. To change a color,
click the color next to the field name. To change the font, click the
Fonts
button. To reset the colors and fonts to the NI-FBUS Monitor defaults, click
the
Default Colors
and
Default Font
buttons. Figure 3-13 shows the
Display Settings
tab.
Figure 3-13.
Display Settings Tab