Chapter 3
Windows and Menus
©
National Instruments Corporation
3-17
FDL Filter Tab
The
FDL Filter
tab filters packets at the FDL layer and lists all of the FDL
PDU types for easy selection. Select the checkbox by an FDL type to
capture that type of packet. The
Show Transfer Errors
checkbox enables
the display of data-transfer errors. A data-transfer error can occur if a
packet does not have the proper checksum attached to it, which can be
caused by bus noise. The NI-FBUS Monitor displays protocol errors along
with the packets. Figure 3-9 shows the
FDL Filter
tab.
Figure 3-9.
FDL Filter Tab