Chapter 3
Windows and Menus
©
National Instruments Corporation
3-19
Filter by Address Tab
The
Filter by Address
tab filters data for a specific address or addresses.
The NI-FBUS Monitor detects and lists all the currently detected addresses
in the
Detected Addresses
box of the
Filter by Address
tab. The
NI-FBUS Monitor captures data only for the selected addresses, and no
other addresses. If you want to capture data for all addresses, click the
Clear All
button to ensure that no other addresses are selected. If you want
to configure the filter before capture, use the
User Defined
field to insert
addresses into the address list. Select the
Hex Addresses
checkbox to view
the addresses in the
Detected Addresses
box in hexadecimal format. The
User Defined
field interprets data entered as hexadecimal data.
Figure 3-11 shows the
Filter by Address
tab.
Figure 3-11.
Filter by Address Tab
Settings Dialog Box
This dialog box contains optional settings for capturing data, displaying
data, and changing the toolbar. To bring up the
Settings
dialog box, select
Settings
from the
Capture
menu.
Capture Settings Tab
The
Capture Settings
tab allows you to select the board to use, and to
specify what you want the NI-FBUS Monitor to do after it receives the
number of packets in the
Max num of packets
field. Figure 3-12 shows the
Capture Settings
tab.
