manualshive.com logo in svg

National Instruments NI ENET-9000 Series, Руководство по началу работы, Страница: 5 / 16

Поделиться
Скачать
National Instruments NI ENET-9000 Series Скачать руководство пользователя страница 5

© 

National Instruments Corporation

5

NI-DAQmx for NI WLS/ENET-9163 Getting Started Guide

6. Use a standard Category 5 Ethernet cable to connect the NI WLS/ENET-9000 

Series device to an Ethernet network.

1

 Connect one end to the RJ-45 Ethernet 

port on the device, and the other end to an Ethernet hub or directly to your 
computer. Refer to the 

NI WLS/ENET-9163 User Guide and Specifications

 for 

information about the Ethernet cable.

7. Power the device using the included power adapter or other 9–30 VDC power 

source.

The POWER and STATUS LEDs light. The POWER LED will light as long as 
power is being supplied to the NI WLS/ENET-9000 Series device. Refer to the 

NI WLS/ENET-9163 User Guide and Specifications

 for information about the 

LEDs on the NI WLS/ENET-9163 chassis.

Step 3. Discover the Device

To discover the device, complete the following steps.

1. Launch Measurement & Automation Explorer (MAX).

2. Expand 

Devices and Interfaces

, right-click 

Network Devices

, and select 

Find Network NI-DAQmx Devices

.

1  

You can either use a standard Category 5 Ethernet cable or an Ethernet crossover cable to connect the 
NI WLS/ENET-9000 Series device directly to your computer.

Содержание NI ENET-9000 Series

















Отзывы:

Нет отзывов