NI-DAQmx for NI WLS/ENET-9163 Getting Started Guide
12
ni.com
Step 5. Self-Test Your Device
In MAX, right-click your NI WLS/ENET-9000 Series device and select
Self-Test
.
Self-test performs a brief test to determine successful device installation. When
the self-test finishes, a message indicates successful verification or if an error
occurred. If an error occurs, refer to
ni.com/support/install
.
Step 6. Attach Sensors and Signal Lines
Attach sensors and signal lines to the terminal block or accessory terminals to your
device. The following table lists the different ways to access device pin
assignments (pinouts).
Location
How to Access Pinout
MAX
Right-click the device name under Network Devices and select
Device Pinouts
.
Right-click the device name under Network Devices and select
Help»Online Device Documentation
. A browser window opens to
ni.com/manuals
with the results of a search for relevant device
documents.
DAQ Assistant
*
Select the task or virtual channel, and click the
Connection
Diagram
tab. Select each virtual channel in the task.
NI-DAQmx
Refer to the
NI-DAQmx Help
that installs with NI-DAQmx.
