2
|
ni.com
|
NI CVS-1458 Getting Started Guide
Optional Equipment
National Instruments offers the following products for use with the NI CVS-1458:
24 VDC, 1.25 A Desktop Power Supply (part number 782032-01)
NI PoE Power Supply to power the Power over Ethernet (PoE) ports (part number
783307-01 for DIN rail version or part number 783308-01 for desktop version)
44-pin D-SUB cable for digital I/O
•
44-pin D-SUB male to pigtail cable (part number 156083-03 for 3 meter cable)
•
44-pin D-SUB male to 44-position D-SUB female cable (part number 156084-03 for
3 meter cable or part number 156084-0R5 for 0.5 meter cable)
NI CVS I/O Accessory
Note
This accessory is unshielded.
•
CVS I/O Accessory and 3 meter 44-pin D-SUB male to 44-position D-SUB female
cable (part number 783327-01)
•
CVS I/O Accessory and 0.5 meter 44-pin D-SUB male to 44-position D-SUB female
cable (part number 783328-01)
DIN Rail Kit (part number 781740-01)
10-position modular plug to 9-pin D-sub serial cable for RS-485 or RS-232 (part number
182845-01 for 1 meter cable, part number 182845-02 for 2 meter cable, or part number
182845-03 for 3 meter cable)
Safety Information
Caution
The following paragraphs contain important safety information you
must
follow when installing and operating the device.
Do
not
operate the device in a manner not specified in the documentation. Misuse of the device
may result in a hazard and may compromise the safety protection built into the device. If the
device is damaged, turn it off and do
not
use it until service-trained personnel can check its
safety. If necessary, return the device to National Instruments for repair.
Keep away from live circuits. Do
not
remove equipment covers or shields unless you are trained
to do so. If signal wires are connected to the device, hazardous voltages can exist even when the
equipment is turned off. To avoid a shock hazard, do
not
perform procedures involving cover or
shield removal unless you are qualified to do so. Disconnect all field power prior to removing
covers or shields.
Because of the danger of introducing additional hazards, do
not
install unauthorized parts or
modify the device. Use the device only with the chassis, modules, accessories, and cables
