©
National Instruments
9
NI 9695 sbRIO Thermal Solution
place of measuring the component case temperatures. The heat spreader temperature
should not exceed 85 °C when measured in the designated center depression, which is
shown in Figure 8.
Figure 8.
Heat Spreader Temperature Measurement Location
Note
For information and examples on environmental and design factors that can impact
the thermal performance of an NI sbRIO system, go to
ni.com/info
and enter the Info
Code
sbriocooling
.
Environmental Management
NI is committed to designing and manufacturing products in an
environmentally responsible manner. NI recognizes that eliminating
certain hazardous substances from our products is beneficial to the
environment and to NI customers.
For additional environmental information, refer to the
NI and the
Environment
Web page at
ni.com/environment
. This page contains the
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.
1
Heat Spreader
2
Center Depression
2
1
