![background image](http://html1.mh-extra.com/html/national-instruments/ni-9695/ni-9695_installation-instructions-manual_3446731006.webp)
NI 9695 sbRIO Thermal Solution
6
ni.com
Installing With the Flat Face of the Heat Spreader Exposed to Air
Figure 6.
Heat Spreader to sbRIO: Flat Face Exposed to Air
1.
Remove gap pad pieces from both liners and apply pink side to heat
spreader pads.
2.
Fasten standoffs (not provided) to mounting surface.
3.
Align sbRIO on standoffs and fasten using provided 16 mm standoffs.
When mounting sbRIO-9623/9626/9633/9636, fasten last two holes
with provided screws. Tighten completely.
4.
Align heat spreader to standoff holes and fasten using provided screws.
Use caution when aligning the heat spreader. Once it has been placed
it should not be considered reworkable.
1
16 mm Standoff
2
Not Provided
2
1