NI 9482
|
© National Instruments
|
9
Connector
The NI 9482 has a 10-terminal, detachable screw-terminal
connector.
Signals
Each channel has two interchangeable pins, CHa and CHb, to
which you can connect a load.
Note
You must use 2-wire ferrules to create a secure
connection when connecting more than one wire to a
single terminal on the NI 9482.
LEDs
Each channel has an LED that indicates the state of the channel.
A channel LED is lit when the channel is on and dark when the
channel is off. The LEDs are disabled when the chassis is in sleep
mode.
Related Information
Sleep Mode
on page 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
