![background image](http://html2.mh-extra.com/html/national-instruments/ni-9472/ni-9472_getting-started-manual_3408108019.webp)
Resetting Channels after an Overcurrent
Condition
After you have determined and fixed the cause of an overcurrent
condition, reset the channel by turning it off.
Alternatively, you can disconnect the external power supply from
the chassis. However, doing so disconnects power from all the
module channels.
Normal operation can resume after you correct the overcurrent
condition and reset the channel.
NI 9472 Getting Started Guide
|
© National Instruments
|
19