background image

© 2008–2014 National Instruments. All rights reserved.

374707E-01

Jul14

Refer to the 

NI Trademarks and Logo Guidelines 

at 

ni.com/trademark

s

 for more information on National 

Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of 
their respective companies. For patents covering National Instruments products/technology, refer to the appropriate 
location: 

Help»Patents

 in your software, the 

patent

s

.txt

 file on your media, or the 

National Instruments Patent 

Notice

 at 

ni.com/patent

s

. You can find information about end-user license agreements (EULAs) and 

third-party legal notices in the readme file for your NI product. Refer to the 

Export Compliance Information 

at 

ni.com/legal/export-compliance

 for the National Instruments global trade compliance policy and 

how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED 
WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR 
ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense 
and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, 
DFAR 252.227-7014, and DFAR 252.227-7015.

Содержание NI 9225

































Отзывы: