NI 653x Cable Adapter User Guide
4
ni.com
Installing Cables
An SHC68-C68-D2 or C68-C68-D4 cable connects the NI 653
x
cable
adapter to the NI high-speed DIO device. Figure 2 shows how to install the
cable.
Figure 2.
Connecting a SHC68-C68-D2 or C68-C68-D4 Cable
to the NI 653
x
Cable Adapter
Caution
Before
connecting the cable, disconnect power from the NI device and any other
connected hardware to prevent damage to the hardware and personal injury. NI is
not
liable
for damage resulting from improper connections.
Refer to Figure 2 as you complete the following steps to install the cable
adapter:
1.
Insert the cable into the cable adapter.
2.
Tighten the cable jackscrews.
Caution
Before
attaching any cables or accessories, install the NI high-speed DIO device.
Refer to the Getting Started Guide that shipped with your device for instructions on
installing the device.
1
PC Chassis with NI High-Speed DIO Device
2
Cable Assembly
3
Cable Jackscrews
4
NI 653
x
Cable Adapter
DIGITAL DATA & CONTROL
4
2
NI PCIe-
653x
1
3
NATIONAL
INSTRUMENTS
653X CABLE ADAPTER
Remove scre
ws on this side of
enclosure to access terminals.