manualshive.com logo in svg

National Instruments MXIbus VME-AT2000, Начало работы

Поделиться
Скачать
National Instruments MXIbus VME-AT2000 Скачать руководство пользователя страница 31

Chapter 2

Hardware Configuration and Installation

© National Instruments Corporation

2-19

VME-AT2000/NI-VXI MS-DOS Getting Started

Step 5.  Install the VME-MXI Hardware

Given below are general installation instructions for the VME-MXI.  Please read the following
important warnings before installing the VME-MXI.  Also consult the user manual or technical
reference manual of your VMEbus chassis for specific instructions and warnings.

Warnings: To protect both yourself and the chassis from electrical hazards, the chassis

should remain off until you are finished installing the board.

The VME-MXI can be installed into your VMEbus chassis either in Slot 1 when
configured as the VMEbus System Controller, or it can be installed in any other
slot except Slot 1 when configured as non-System Controller.  Installing your
VME-MXI into a slot that does not correspond with the jumper settings may
result in damage to the VME-MXI, the VMEbus backplane, or both.

1. Plug in your VMEbus chassis before installing the VME-MXI.  The plug grounds the chassis

and protects it from electrical damage while you are installing boards.

2. Remove or open any doors or covers blocking access to the chassis slots.

3. Select the slot in the chassis that is correct for your system and insert the VME-MXI in the

slot by aligning the top and bottom of the card with the card edge guides inside the chassis.
Slowly push the VME-MXI straight into the slot until its plug connectors are resting on the
backplane's receptacle connectors.  Using slow evenly distributed pressure, press the
VME-MXI straight in until it seats in the expansion slot.  The front panel of the VME-MXI
should be even with the front panel of the chassis.

4. Tighten the retaining screws on the top and bottom edges of the front panel.

5. Check the installation.

6. Connect the cables as described in the following section before restoring power.

7. Replace or close any doors or covers to the chassis.

Содержание MXIbus VME-AT2000














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды