manualshive.com logo in svg

National Instruments MXIbus VME-AT2000, Начало работы

Поделиться
Скачать
National Instruments MXIbus VME-AT2000 Скачать руководство пользователя страница 24

Hardware Configuration and Installation

Chapter 2

VME-AT2000/NI-VXI MS-DOS Getting Started

2-12

© National Instruments Corporation

4. Locate the metal bracket that covers the cut-out in the back panel of the PC AT chassis for

the slot you have selected.  Remove and save the bracket-retaining screw and the bracket
cover.

5. Touch the metal part of the power supply case inside the computer to discharge any static

electricity that might be on your clothes or body.

6. Line up the AT-MXI with the MXIbus connector near the cut-out on the back panel and the

other card edge lined up with the respective slot guide.  Slowly push down on the front of the
AT-MXI until its card edge connector is resting on the expansion slot receptacle.  Using
slow, evenly distributed pressure, press the AT-MXI straight down until it seats in the
expansion slot.

7. Reinstall the bracket retaining screw to secure the AT-MXI to the back panel rail.

8. Check the installation.

9. Replace the computer cover.

Figure 2-5 shows an AT-MXI installed in a PC AT with a MXIbus cable attached.

Cut-outs

ISA Bus

Slot (16 -bit)

Card Guides

MXI Connector

AT-MXI Board

ISA Bus 

Card Edge Connector

Figure 2-5.  AT-MXI Installed in a Computer

Содержание MXIbus VME-AT2000














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды